Innova 5610: Performing a Steering Angle Sensor (SAS) Recalibration
Video Reference:
Steering Angle Sensor (SAS) Calibration
Note: If an error occurs while performing calibration procedures, an Advisory message will display. Choose Exit to return to the Main Menu.
Step 1 - While linked to the vehicle, press the MENU button.
While linked to the vehicle, press the MENU button. |
Step 2 - Select Service Reset, then press ENTER ↵.
The Main Menu will display. Select Service Reset, then press ENTER ↵. |
Step 3 - Select Steering Angle Sensor Calibration, then press ENTER ↵.
The Service Reset screen displays. Select Steering Angle Sensor Calibration, then press ENTER ↵. For some vehicles, a submenu displays. Select the desired option, then press ENTER ↵. Proceed to step 4. Select Exit to return to the Main Menu. |
|
A brief One moment please message will display. |
Note: If SAS calibration is not supported by the vehicle under test, an Advisory message displays.
Step 4 - Press Yes to confirm your vehicle.
Confirm your vehicle by pressing Yes. |
Step 5 - Select the procedure, and press ENTER ↵.
Select the procedure, and press ENTER ↵. | |
A One moment please message will display. |
Step 6 - Select the procedure, and press ENTER ↵.
Select the procedure, and press ENTER ↵. | |
Select again the procedure, and press ENTER ↵. |
Step 7 - Follow the procedures on the screen until the procedure is completed. Press Next, as appropriate, to scroll to the next screen.
For some vehicles, a Status screens display as each phase of the calibration procedure is successfully completed. Select Next, as appropriate, to scroll to the next screen. A Results screen will display when the calibration procedure has been completed. |