Innova 5610: Performing an EPB Reset

EPB Reset

EPB Reset procedures vary depending on make and model of vehicle.

Service Reset (EPB Reset)



Note: If an error occurs while performing an EPB Reset, an Advisory message will display. Select Exit to return to the Main Menu.

Step 1 - Press the MENU button.

Press the MENU button.

Step 2 - Select Service Reset, then press ENTER ↵.

The Main Menu will display.

Select Service Reset, then press ENTER ↵.

Step 3 - Select EPB Reset, then press ENTER ↵.

The Service Reset screen will display.

Select EPB Reset, then press ENTER ↵.

A One Moment Please message will display.

Note: For some vehicles, one or more submenus displays. Select the desired module and/or option and press ENTER ↵. Proceed to step 4.

Step 4 - One or more Informational/instructional screens will display.

Perform test procedures as directed. Select Next, as appropriate, then scroll to the next screen.

Step 5 - For some vehicles, Status screens display as each phase of the calibration procedure is successfully completed. Select Next, as appropriate, to scroll to the next screen.

A Results screen will display when the calibration procedure has been completed.

Note: If the procedure is stopped due to a communication error, an Advisory message will display.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us