Innova 5510: The Main Menu

Purpose

To guide you on the functions found under the Main Menu button while using the Innova 5510.

Main Menu

You can use the Scan Tool to perform additional diagnostic tests, view diagnostic and vehicle information stored in the vehicle's onboard computer, and configure the Scan Tool for your particular needs. These functions are accessed through the Main Menu.

Available Functions

The Main Menu has the following features:

System Test - Displays a menu of system tests for the vehicle under test, which lets you perform OBD Monitor, EVAP, and I/M Monitor tests.
Vehicle Information – Displays the Vehicle Info menu, which lets you retrieve and view reference information for the vehicle under test.
DLC Locator – This lets you find the location of the Data Link Connector (DLC) for a specified vehicle.
Hybrid/EV Battery Test, Battery/Alternator Test – Performs a check of the vehicle’s battery and alternator system (or hybrid/EV battery system) to ensure the system is operating within acceptable limits.
Drive Cycle Procedure – This lets you view drive cycle procedures for a selected vehicle monitor.
Service Reset – This lets you reset the Oil Maintenance Light, reset the battery monitor system after battery replacement, perform calibration procedures for the vehicle’s Steering Angle Sensor (SAS), perform Electronic Parking Brake (EPB) cable replacement and reset, or perform Anti-Lock Brake System (AVS) bleeding.
Service Check – This lets you view the current engine oil level and oil life remaining.
Firmware Version – Displays the Scan Tool’s firmware version.
Tool Library – Displays the Tool Library menu, which provides access to OBD1 and OBD2 DTC libraries and to definitions for Monitor icons and LED indications.
Tool Settings – Displays the Tool Settings menu, which lets you make several adjustments and settings to configure the Scan Tool to your particular needs.