Innova 5510: Scanning & Viewing DTCs for Tire Pressure Monitoring System (TPMS)

Purpose

To guide you on navigating to your TPMS DTC codes while using the Innova 5510.

Note: Refer to the manufacturer’s website for vehicle year, makes, and models covered.

Step 1 - While linked to your vehicle, press the System Status button.

While linked to your vehicle, press the System Status button to navigate to your list of scan options.

Step 2 - Press DOWN▼ to scroll to the TPMS option then press ENTER ↵.

The System Menu will display.

Scroll through the options in the System Menu by pressing the DOWN ▼ button and select the TPMS option by pressing ENTER ↵.

Step 3 - Select 'Yes' and press ENTER ↵ to confirm your vehicle.

Confirm your vehicle by selecting 'Yes' and pressing ENTER ↵.

Step 4 - Wait for the 5510 to complete the scan.

A 'One moment please' message will display while your Scan Tool retrieves your TPMS DTCs. Wait until the scan is 100% complete.

If the Scan Tool fails to link to the vehicle’s computer, a 'Communication Error' message will show. In this case:

Ensure your vehicle is OBD2 compliant.
Verify the connection at the DLC port and that your ignition is turned 'On.'
Turn the ignition 'Off', wait 5 seconds, then turn the ignition back 'On' to reset the vehicle's computer.
Press the POWER/LINK button to continue.

If the Scan Tool cannot link to the vehicle’s computer after three attempts, the 'Contact Technical Support' message will display.

Press the System Status button to return to the System Menu.
Turn the ignition off, and disconnect the Scan Tool.
Contact Technical Support for assistance

Note: If TPMS functionality is not supported, an advisory message will show. Press SYSTEM STATUS to return to the System Menu.

Step 5 - Press UP▲ or DOWN▼ to scroll through your TPMS codes.

After your tool finishes scanning, press the UP ▲ and DOWN ▼ buttons to scroll through the TPMS codes.

You may refer to Display Functions for a description of each display element.

When the last retrieved DTC has been displayed press the DOWN ▼ button again to return to the first code.

If the definition for the currently displayed code is not available, an advisory message shows.

In the case of codes with long definitions, a small arrow will show in the upper/lower right-hand corner of the screen to indicate the presence of additional information.

If no codes are present, the message 'No TPMS DTCs are presently stored in the vehicle’s computer' will show.

To exit the TPMS Display Code screen, press any Hot Key.

Note: You may also press the DTC/FF button to scroll through your codes one at a time.

Step 6 - To return to your TPMS codes press the DTC/FF button.

To return to your TPMS codes after pressing any button, press the DTC/FF button to re-display your TPMS codes.

Whenever the Scroll function is used to view additional codes, the Scan Tool’s communication link with the vehicle’s computer disconnects. To re-establish communication, press the POWER/LINK button again to rescan for TPMS.

Note: Initiating another test from the System Menu such as scanning for ABS will replace the TPMS codes shown with the ABS codes when you press the DTC/FF button.