Innova 5210: Navigating to the OBD2 DTC Library

Purpose

To guide you on how to utilize the OBD2 DTC Library of the Innova 5210.

Step 1 - Press the MENU button.

To access the OBD2 DTC Library, press the MENU button.

Step 2 - Select Tool Library, then press ENTER ↵.

The Main Menu will display.


Scroll through the screen using the button and find Tool Library, then press .

Step 3 - From the Tool Library menu, select DTC Library, then press ENTER ↵.

The Tool Library Menu will display.


Select DTC Library, then press .

Step 4 - Select OBD2 Library, then press ENTER ↵. 

Select OBD2 Library, then press .

Step 5 - Select the desired vehicle manufacturer, then press ENTER ↵.

The Select Make screen will display.


Navigate through the screen using the and buttons.


Select Next and press if you want to view the next page.

Select the desired vehicle make, then press .

Step 6 - Enter the DTC.

The DTC Library screen will display starting with the code P0001.


Press or , as necessary, to scroll to the desired DTC type (P=Powertrain, U=Network, B=Body, C=Chassis), then press DTC/FF.


The selected character will display solid, and the next character is highlighted.


When the desired DTC is already reflected on the screen, press .

Step 7 - View the DTC definition.


The DTC definition you inputted will display on the screen.


When you have finished viewing the DTC definition, select Back and press ↵ to return to the Enter DTC screen and enter additional DTCs, or press the MENU button to return to the Main Menu.

Note: If a definition for the DTC you entered is not available, an advisory message will show.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us