Innova 5110: Display Functions

1. I/M MONITOR STATUS- Identifies the I/M Monitor status area.

2. Monitor icons - These icons indicate which Monitors are supported by the vehicle under test, and whether or not the associated Monitor has run its diagnostic testing (Monitor status). When a Monitor icon is solid, it indicates that the associated Monitor has completed its diagnostic testing. When a Monitor icon is flashing, it indicates that the vehicle supports the associated Monitor, but the Monitor has not yet run its diagnostic testing. The (I/M) Monitor Status icons are associated with Inspection and Maintenance (I/M) Readiness Status. Some states require that all vehicle Monitors have run and completed their diagnostic testing before a vehicle can be tested for Emissions (Smog Check). A maximum of fifteen Monitors are used on OBD2 systems. Not all vehicles support all fifteen Monitors. When the code reader is linked to a vehicle, only the icons for monitors that are supported by the vehicle under test are visible. 

3. Link icon – When visible, indicates that the code reader is currently communicating with the vehicle’s computer. 

4. Vehicle icon - This icon indicates whether or not the Code Reader is being properly powered through the vehicle's Data Link Connector (DLC). A visible icon indicates that the Code Reader is being powered through the vehicle's DLC connector.

5. MIL icon - This icon indicates the status of the Malfunction Indicator Lamp (MIL). The MIL icon is visible only when a DTC has commanded the MIL on the vehicle's dashboard to light.

6. ABS icon - This icon indicates the currently displayed DTC is an Anti-Lock Braking System code.

7. History icon - This icon indicates the currently displayed DTC as a History code.

8. Freeze Frame icon- This icon indicates that Freeze Frame data has been stored in the vehicle’s computer for the currently displayed DTC.

9. Pending icon - This icon indicates the currently displayed DTC as a Pending code.

10. Permanent icon - This icon indicates the currently displayed DTC as a Permanent code.

11. DTC Display Area - Displays the Diagnostic Trouble Code (DTC) number. Each fault is assigned a code number that is specific to that fault.

12. Code number sequence - The Code Reader assigns a sequence number to each DTC that is present in the computer's memory, starting with 01. This helps keep track of the number of DTCs present in the computer's memory. Code number 01 is always the highest priority code and the one for which Freeze Frame data has been stored.

13. Code enumerator - This icon indicates the total number of codes retrieved from the vehicle’s computer.

14. Severity - This icon indicates the level of severity for the priority code (code number 1), as follows:

• 1 - Service should be scheduled and repairs made when convenient. This DTC typically has no immediate threat to essential system components in the short term.
• 2 - Repair immediately if drivability issues are present and if there is a threat to essential system components if not repaired as soon as possible.
• 3 - Stop and repair the vehicle immediately to prevent interrelated failures that are potentially harmful and damaging to essential system components.

15. Bluetooth icon – This icon indicates your tool's communication status with a compatible Innova mobile application. When ON, indicates an active Bluetooth connection has been established. When OFF, indicates Bluetooth is not connected.