Innova 5310: The Main Menu

Purpose

To guide you on the functions found under the Main Menu button while using the Innova 5310.

Main Menu

You can use the Scan Tool to perform additional diagnostic tests, view diagnostic and vehicle information stored in the vehicle's onboard computer, and configure the Scan Tool for your particular needs. These functions are accessed through the Main Menu.

Available Functions

The Main Menu has the following features:

System Test – Displays the System Test menu, which lets you retrieve and view results for the O2 Sensor Test and OBD Monitor Test, and lets you initiate a test of the vehicle’s EVAP system.
Service Reset – This lets you reset the Oil Maintenance Light.
Service Check – This lets you view the current engine oil level and oil life remaining.
Battery/Alternator Test – Performs a check of the vehicle’s battery and alternator system to ensure the system is operating within acceptable limits.
DLC Locator – This lets you find the location of the Data Link Connector (DLC) for a specified vehicle.
Vehicle Information – Displays the Vehicle Info menu, which lets you retrieve and view reference information for the vehicle under test.
Firmware Version – Displays the Scan Tool’s firmware version.
Tool Library – Displays the Tool Library menu, which provides access to OBD1 and OBD2 DTC libraries and definitions for Monitor icons and LED indications.
Tool Settings – Displays the Tool Settings menu, which lets you make several adjustments and settings to configure the Scan Tool to your particular needs.