INNOVA 3210RS: Setting up Live Data

Purpose

To explain the steps on how to set up the live data function while using the INNOVA 3210RS.

Step 1 - Select Record Live Data.

After pairing the RS2 App with the 3210RS, to use the live data function, select the 'Record Live Data' button in the vehicle scan menu or 'Live Data' on the bottom tab section.

Step 2 - Select parameters.

Select the parameters for Live Data then select 'Done'.

Note: You can only input and view up to 8 parameters.

Step 3 - Select the Start Recording button.

After selecting the parameters that you want a Live Data recording for, you will be redirected to the Live Data Dashboard, where the parameters are in Grid Mode. Select the 'Start Recording' button to start gathering powertrain live data on the OBD2 Scanner.

Step 4 - After gathering the data, select stop.

Once you have gathered the data, select the 'Stop' button beside the recording time in the dialogue box.

Step 5 - View parameter values.

While recording, you can either view the parameter values in Grid View Mode (data is in numerical values) or Graph View Mode (data is in the graph values).

Example: Grid View Mode

Example: Graph View Mode

View Past Recordings

Step 1 - Select Past Recording.

Another 3210RS live data feature is the capability to view past recordings. To access the Past Recording feature, select the 'Past Recording' button within the Live Data Screen, then select the recording you want to view.

Note: A recording that you want to view replays according to the time and date indicated in the recorded data.

Step 2 - Select Live Replay.

To view a live replay of a past recording you want to check, select the 'Live Replay' button.

Step 3 - View previously recorded video

After selecting the 'Live Replay' button, you will see a video of the Live Data you previously recorded.