First, connect the Innova SDS50 SDS-Tech Tablet Scan Tool to your vehicle via the Diagnostic Link Connector (DLC) to retrieve the vehicle's information, such as Vehicle Identification Number (VIN) and model.

Then, select the 'OBD2 Diagnostic' function.

Tap on the 'OBD Mode Tests' at the top of the Innova SDS50 SDS-Tech Tablet Scan Tool Scan Tool to perform the various available emissions readiness tests. When available, these tests will return test values with acceptable ranges, and/or a pass or fail state, so you can determine if a system is functioning outside of its optimal range.

Available tests include:

• Mode $01: Inspection/ Maintenance Monitor Test displays the monitor readiness status for gasoline and diesel engines.
• Mode $05: Oxygen Sensor displays oxygen sensor monitoring test results.
• Mode $06: Onboard Diagnostic Mode Test displays the on-board monitoring test results for specific monitored systems that the vehicle performs to determine when an engine code should be triggered.
• Mode $08: Evaporative Test allows you to perform bidirectional control of an onboard system or test. Please note that the test is currently limited to some evaporative emissions systems and allows the user to perform leak detection testing.

Tap the ‘I/M Readiness Status - $01, $41’ function.

The Since DTCs Cleared - $01 indicates the status of the monitors since the DTCs are erased.

This Drive Cycle - $41 indicates the status of the monitors since the current drive cycle began.

Note: If the vehicle under test does not support Since DTCs Cleared - $01 or This Drive Cycle - $41, a warning message displays 'This vehicle does not support this monitor type'.

Tap the ‘O2 Sensor Monitor - $05’ function.

The Oxygen Sensor Monitor Mode $05 gives customers detailed information about the oxygen sensor performance in the vehicle.

Note: Service Mode $05 is not supported in ISO 15765-4 (CAN) applications. Vehicle might be from 2008.

Tap the ‘OBD Monitor Test - $06’ function.

The OBD Monitor Test Mode $06 runs diagnostic tests on emissions-related powertrain components and systems. The Innova SDS50 SDS-Tech Scan Tool retrieves the results of these tests from the vehicle’s computer memory providing pass or fail results for the most recent tests. If the vehicle under test does not support OBD Monitor Test, a warning message displays 'OBD Monitor Test is not supported'.

Tap the ‘Request Control On-Board System - $08’ function.

Next, select the type of engine.

The Request Control On-Board System - $08 allows customers to initiate testing of specific vehicle components or systems. The tool sends a command to the vehicle’s computer and retrieves the results once the test is complete. The specific components and systems available for testing may vary depending on the manufacturer’s make and model of the vehicle.