Innova SDS43 SDS-Inspector: Alternator Test
Purpose
To guide you on how to check the alternator status while using the Innova SDS43 SDS-Inspector Tablet Scan Tool.
Introduction
In addition to the battery, the alternator serves as the crucial centerpiece of the automotive electrical system. It not only provides power for charging the vehicle’s battery and supporting other systems but also ensures a consistent supply of electricity for a wide range of components, from the ignition system to the entertainment features. Therefore, it is of utmost importance to ensure the proper functioning of the alternator in all conditions, to prevent unexpected situations while driving.
This article guides you through the process of performing the Alternator Test function while using the SDS43 SDS-Inspector Tablet Scan Tool.
Procedure
Step 1 - Connect the SDS43 SDS-Inspector Tablet Scan Tool to the vehicle and select 'Workshop Tools' |
First, connect the Innova SDS43 SDS-Inspector Tablet Scan Tool to your vehicle via the Diagnostic Link Connector (DLC) to retrieve the vehicle's information, such as VIN and On-Board Diagnostic (OBD2) information. To access the ‘Workshop Tools’, from the Home Screen, select 'Workshop Tools' section and press the ‘OK’ button. |
|
The Innova SDS43 SDS-Inspector Tablet Scan Tool offers a range of features, including 12 Service Reset functions, as well as the Vehicle Inspection and Battery/Alternator Test functions. To initiate the Alternator Test function, you can choose the ' Battery/Alternator Test' item from the list then press the ‘OK’ button. In the Battery/Alternator Test menu, select the ‘Alternator Test’ item and then press the ‘OK’ button to enter the Alternator Test function. |
|
Initially, start the engine and turn on the headlights. Ensure that your vehicle meets the requirements; otherwise, you will not be able to proceed. Then, select the 'Continue' softkey and then press ‘OK’ button to move to the next step. |
|
Upon selecting the "Continue" button in the preceding step, a screen appears on the Scan Tool as in the image. Subsequently, keep the accelerator pedal pressed to maintain engine speed above 2000 RPM for 20 seconds to assess the alternator's status. NOTE: A countdown timer indicates ongoing processing. |
|
Turn OFF the headlights, let the engine run at idle speed, and refer to the following screen for the alternator status display. |
|
The Alternator Test function has test results that fall into three categories: Good, Voltage High, Voltage Low. For Good status, the charging voltage meets the specifications; the alternator and the charging system are working well. For a Voltage High status, the charging voltage is not within the normal range. This could indicate a problem with the alternator or charging system components. To ensure the proper functioning of your charging system, inspect it for any defects or have it inspected at a certified repair center. For a Voltage Low status, the charging voltage is higher or lower than the safe limit, which may harm the battery or other electrical components. To avoid damage, check your charging system, alternator, or components, or have them inspected by a certified repair center. |
|
Select ‘Alternator Live Data’ item in the Battery/Alternator Test menu, then press ‘OK’ button. The Alternator Live Data will be shown as the image. The value of the Alternator Live Data provides the information of alternator’s status in the real-time, the mechanics or diagnostic technician can use this information in the repair process. When you’ve concluded viewing the Alternator Live Data, press ‘Back’ button to return to the Battery/Alternator Test menu. |
Alternator Test