Innova SDS50 SDS-Tech: Transmission Fluid Change Reset

Purpose

To guide users on how to perform the Transmission Fluid Change Reset function while using the Innova SDS50 SDS-Tech Tablet Scan Tool.

Introduction

The Transmission Fluid Change Reset is a procedure performed on a vehicle's transmission system after the transmission fluid has been changed. It involves resetting the Transmission Control Module (TCM) or Transmission Fluid Life monitors to ensure accurate monitoring of the condition of the new fluid and performance.

The purpose of this function is to allow the TCM to relearn the characteristics of the new transmission fluid and adjust its operating parameters accordingly. The TCM is responsible for controlling various aspects of the transmission system, such as shift points, torque converter lockup, and overall performance. By resetting it, the TCM can adapt to the fresh fluid and optimize its operation for improved efficiency and longevity.

Resetting the Transmission Fluid Change usually requires accessing the vehicle's onboard diagnostic system, which can be done through a diagnostic tool or by following specific steps outlined in the vehicle's user manual.

Procedure

Step 1 - Connect Innova SDS50 SDS-Tech Tablet Scan Tool to the vehicle and select 'Workshop Tools' function

First, connect the Innova SDS50 SDS-Tech Tablet Scan Tool to your vehicle via the On-Board Diagnostics (OBD) connector to retrieve the vehicle's information, such as Vehicle Identification Number (VIN) and model.

Then, select the 'Workshop Tools' section.

Step 2 – Select the ‘Transmission Fluid Change Reset’ function to perform the Transmission Fluid Change Reset

The Innova SDS50 SDS-Tech Tablet Scan Tool shows the list of functions available for your vehicle. To initiate the Transmission Fluid Change Reset, choose the ‘Transmission Fluid Change Reset' item from the list.

To access the reset function, choose the ‘Powertrain’ system.  

NOTE: The name of the system varies by manufacturer, year, and model.

Select the ‘TCM – Transmission Control Module’ system.

Step 3 – Select the Transmission Fluid Change function

Select the ‘Reset Transmission Oil Life’ function

NOTE: The ‘Transmission Fluid Change Reset’ function name can vary between manufacturers.

Step 4 – Perform the ‘Transmission Fluid Change Reset’ function

	Wait for the Scan Tool to communicate with the vehicle to check the Transmission Oli Life status and shows as in the image. After that tap the ‘Input New Value’ button to input the new value of the Transmission Oil Life. NOTE: Prioritize replacing the Transmisision Oil before proceeding with the 'Reset Transmission Oil Life' function to guarantee accurate fuel filter status for future maintenance.
	Select the ‘Next’ button to go the next step.
	In this screen, input the new value of the Transmission Oil Life and select ‘Perform Reset’ button on the pop-up to perform the function.
	Wait the Scan Tool communicate with the vehicle and write the new value into the TCM memory. After that select the ‘Exit’ button to exit the function.

Reference Video