Innova SDS43 SDS-Inspector: Setup
- Vehicle Inspection Setup
- AutoLink Setting
- Wifi Setting
- Adjust Brightness
- Audible Tone
- Language Selection
- Unit of Measurement
- Smog Check or I/M Program Location
- QR RSPro App
- QR RSPro App Settings
- Version Information
- Update
Purpose
To guide you on how to set up your Innova SDS43 SDS-Inspector Tablet Scan Tool.
Procedure
Step 1 - Connect the SDS43 SDS-Inspector Tablet Scan Tool to the vehicle and select 'Settings'
|
First, connect the Innova SDS43 SDS-Inspector Tablet Scan Tool to your vehicle via the Diagnostic Link Connector (DLC) to retrieve the vehicle's information, such as VIN and On-Board Diagnostic (OBD2) information. |
|
To access the ‘Settings’, from the Home Screen, select 'Settings' section and press the ‘OK’ button. |
|
The Scan Tool shows the item list for setting as in the image. There are 12 setting function for your Innova SDS43 SDS-Inspector Tablet Scan Tool as below: Select each item, then press the 'OK' button to customize your Tablet Scan Tool. |