Innova 3360: Alarm Settings

Step 1 - Go to the Settings Menu and select Warning.

In the Settings Menu overview, select Warning. You will be directed to the interface.

Step 2 - Press the Up or Down button to select either High Alarm or Low Alarm.

Press the Up or Down button to select either High Alarm or Low Alarm. The yellow highlight bar moves to another option.

Step 3 - Press the Back/Power button.

If you want to exit the alarm setting interface, press the Back/Power button.

Step 4 - Press the Confirm/Menu/OK button.

If you want to proceed, press the Confirm/Menu/OK button to enter the corresponding high alarm/low alarm interface according to the highlighted selection bar.

If you selected the High Alarm interface

Step 1 - Enter the high alarm interface by pressing the Up or Down button.

Press the Up button and the high-temperature alarm threshold will increase; hard press can increase the temperature continuously. Press the Down button, the high-temperature alarm threshold will decrease; hard press can reduce the temperature continuously.

Step 2 - Press the Confirm/Menu/OK button to activate alarm.

Press the Confirm/Menu/OK button to open or close the start button. Open this button to set that if the measured object is higher than the set maximum temperature threshold, the instrument will have an alarm sound; if it is closed, no alarm will sound.

Step 3 - Press the Back/Power button.

Press the Back/Power button to exit the high alarm interface and return to the alarm options interface.

If you selected the Low Alarm interface

Step 1 - Enter the low alarm interface by pressing the Up or Down button.

Press the Up button, to increase the threshold for low-temperature alarms; press and hold to increase continuously. Press the Down button, and the threshold for low-temperature alarms will decrease; hard presses will reduce them continuously.

Step 2 - Press the Confirm/Menu/OK button to activate alarm.

Press the Confirm/Menu/OK button to open or close the start button. Open this button to set that if the measured object is higher than the set minimum temperature threshold, the instrument will have an alarm sound; if it is closed, no alarm will sound.

Step 3 - Press the Back/Power button.

Press the Back/Power button to exit the low alarm interface and return to the alarm options interface.