Innova 1000: How to View Mode 6

Mode 6 on Innova 1000

Mode 6 is one of the OBD Modes that Innova 1000 provides. Mode 6 is stored data for On- Board System Tests when performing a scan. This data shows a broad reading, but provides help by giving the user a starting point on where to begin the troubleshooting process.

With Innova 1000, Mode 6 is under Vehicle Health. To view Mode 6, you can follow the steps below:

Step 1 - Select Read Codes or Whole System.

• After pairing with the RS2 app, you can access Vehicle Health by selecting Read Codes or Whole System.

Step 2 - Wait until the RS2 app reads the data from your vehicle.

• The RS2 app will read the data from your vehicle, including the odometer.

Step 3 - Select Generate Report.

• After your vehicle's odometer is read by the RS2 app, select Generate Report.

• While generating the report, ensure your vehicle is turned to the ON position, and your smart device is close to your Innova 1000.

  Once the report is generated, a Done message will be shown on the screen.

Step 4 - View Report Page.

• The Report Page will appear after the RS2 app is done generating reports. You can see Mode 6 or Vehicle Health in the following Systems:  
  • Oil Life
  • Oil Level
  • Battery Status
  • Transmission Fluid Temp
  • Tire Pressure