Innova 3380: Safety Precautions

Precautions

Many of the common test procedures used by experienced service technicians require precautions to avoid accidents that can result in personal injury, and/or damage to your vehicle or test equipment. Always follow the precautionary measures before and during any test or service procedure. 

Always observe the following general safety precautions: 

  • The borescope is intended for use by adults or under adult supervision only.
  • The borescope is not designed for use in medical applications.
  • Use the borescope only in a clean, well-ventilated area with adequate illumination.
  • Do not operate the borescope in an environment where temperature exceeds 140°F (60°C).
  • Fuel and battery vapors are highly flammable. To prevent an explosion, do not use the borescope near flammable liquids, gasses or dust. 
  • Do not use the borescope near corrosive chemicals. These substances can damage the tool’s protective coating and reduce the working life of the tool.
  • To protect your eyes from propelled objects as well as hot or caustic liquids, always wear approved safety eye protection. 
  • Do not allow the snake camera to bend at an angle greater than 60 degrees.
  • Do not allow liquid or foreign matter to enter the borescope. If condensation is present, allow it to evaporate before using the tool. 
  • Store the borescope in a dry, well-ventilated area. 
  • Clean the borescope housing with a 70% alcohol solution and lint-free cloth. Clean the LCD display by wiping gently with a clean, dry lint-free cloth.
Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us