Innova 3380: Safety Precautions

Precautions

Many of the common test procedures used by experienced service technicians require precautions to avoid accidents that can result in personal injury, and/or damage to your vehicle or test equipment. Always follow the precautionary measures before and during any test or service procedure.

Always observe the following general safety precautions:

The borescope is intended for use by adults or under adult supervision only.
The borescope is not designed for use in medical applications.
Use the borescope only in a clean, well-ventilated area with adequate illumination.
Do not operate the borescope in an environment where temperature exceeds 140°F (60°C).
Fuel and battery vapors are highly flammable. To prevent an explosion, do not use the borescope near flammable liquids, gasses or dust.
Do not use the borescope near corrosive chemicals. These substances can damage the tool’s protective coating and reduce the working life of the tool.
To protect your eyes from propelled objects as well as hot or caustic liquids, always wear approved safety eye protection.
Do not allow the snake camera to bend at an angle greater than 60 degrees.
Do not allow liquid or foreign matter to enter the borescope. If condensation is present, allow it to evaporate before using the tool.
Store the borescope in a dry, well-ventilated area.
Clean the borescope housing with a 70% alcohol solution and lint-free cloth. Clean the LCD display by wiping gently with a clean, dry lint-free cloth.