Innova 3380: Adjust LED brightness
Purpose:
To guide users on how to adjust the LED brightness while using the Innova 3380 Handheld Borescope.
Step 1 - Press the 'LED' button.
|
With the borescope powered on, press the 'LED' button. The borescope enters the setting mode. |
Step 2 - Adjust the LED brightness.
|
Adjust the LED brightness as desired. Press the 'Left/Decrease' button to decrease the LED brightness. Press the 'Right/Increase' button to increase the LED brightness. |
Step 3 - Press the 'LED' button to save and exit.
|
When the desired LED brightness is obtained, press the 'LED' button to save your changes and exit the setting mode. |