Innova 5510: Performing ABS Bleeding

ABS Bleeding

The ABS Bleeding function is not supported by every vehicle. It depends on the year, make, and model of vehicle. Please visit our Coverage Checker to verify if ABS Bleeding is supported for your specific vehicle.

Note: If an error occurs while performing ABS bleeding procedures, an Advisory message will display. Select Exit and ENTER ↵ to return to the Service Reset menu.

Step 1 - While linked to the vehicle, press the MENU button.

While linked to the vehicle, press the MENU button.

Step 2 - Select Service Reset, then press ENTER ↵.

The Main Menu will display.
Select Service Reset, then press ENTER ↵.

Step 3 - Select ABS Bleeding, then press ENTER ↵.

The Service Reset screen will display.
Select ABS Bleeding, then press ENTER ↵.

Step 4 - Select 'Yes' and press ENTER ↵ to confirm your vehicle.

Confirm your vehicle by selecting 'Yes' and press ENTER ↵.

Step 5 - Select the desired option and press ENTER ↵.

Select the desired option and press ENTER ↵.

Step 6 - One or more 'informational/ instructional' screens will display.

One or more 'informational/ instructional' screens will display.
Scroll using the DOWN ▼ button until you reach the end.
Select 'Next' and ENTER ↵ to continue performing the procedure.
For some vehicles 'status' screens will display as each phase of the calibration procedure is successfully completed. Select Next or Continue, as appropriate, to scroll to the next screen.

Note: If the procedure is stopped due to a communication error, an 'advisory' message will display. Select Exit and press ENTER ↵ to return to the Service Reset menu.

Click here if you'd like to read more on whether your vehicle will support ABS Bleeding.