Innova 5510: Performing EPB Reset

Purpose

To guide you on how to perform EPB Reset with the Innova 5510.

EPB Reset

EPB Reset procedures vary depending on make and model of vehicle.

Note: If an error occurs while performing an EPB Reset, an Advisory message will display. Press the MENU button to return to the Main Menu.

Step 1 - Press the MENU button.

  • Press the MENU button.

Step 2 - Select Service Reset, then press ENTER ↵.

  • The Main Menu will display.

    Select Service Reset, then press ENTER ↵.

Step 3 - Select EPB Reset, then press ENTER ↵.

  • The Service Reset screen will display.

    Select EPB Reset, then press ENTER ↵.

  • Select Yes and press ENTER ↵ to confirm your vehicle.
  • A One Moment Please message will display.

    For some vehicles, one or more submenus will display. Select the desired option and press ENTER ↵. Proceed to step 4.

Note: For some vehicles, one or more submenus displays. Select the desired module and/or option and press ENTER ↵. Proceed to step 4.

Step 4 - One or more informational/instructional screens will display.

Perform test procedures as directed. Select Next and press ENTER ↵, as appropriate, then scroll to the next screen.

Step 5 - For some vehicles, Status screens will display as each phase of the calibration procedure is successfully completed. Select Next and press ENTER ↵, as appropriate, then scroll to the next screen.

A Results screen will display when the calibration procedure has been completed.

Note: If the procedure is stopped due to a communication error, an Advisory message will display.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us