Innova 5410: Viewing Battery Reset Procedures

Battery Reset

You can use the Innova 5410 to view the procedures for resetting the battery monitor system following battery replacement or perform battery reset OBD service. 

Step 1 - Press the MENU button.

• To access the Battery Reset instructions, press the MENU button.

Step 2 - Select Service Reset, then press ENTER ↵.

• The Main Menu will display.

  Select Service Reset, then press ENTER ↵.

Step 3 - Select Battery Reset, then press ENTER ↵.

• The Service Reset menu will display.

  Select Battery Reset, then press ENTER ↵.

Step 4 - Press Yes to confirm your vehicle.

• Press Yes to confirm your vehicle.

Step 5 - Select Battery Reset Procedures, then press ENTER ↵.

• The Battery Reset menu will display.

  Select Battery Reset Procedures, then press ENTER ↵.

Step 6 - Select the procedure you wish to view, then press ENTER ↵.

• The Battery Reset Procedures menu will display.

  The menu provides access to General Information, and procedures to be followed Before Battery Disconnection, Before Battery Connection, and After Battery Connection. 

  Select the procedure you wish to view, then press ENTER ↵.

• The selected procedure will display. 

  Navigate through the steps using the UP ▲ and DOWN ▼ buttons.

Step 7 -  Press the MENU button to return to go back.

• When you have finished viewing the retrieved information, press the MENU button to go back. Repeat step 6 to view additional procedures. 

  When you have finished viewing all desired procedures, press the MENU button to return to the Main Menu.