Innova SDS50 SDS-Tech: Set up

Purpose

To guide you on how to set up your Innova SDS50 SDS-Tech Tablet Scan Tool.

Procedure

Step 1 - Connect the SDS50 SDS-Tech Tablet Scan Tool to the vehicle and select 'Settings'

  • First, connect the Innova SDS50 SDS-Tech Tablet Scan Tool to your vehicle via the On-Board Diagnostics (OBD) connector to retrieve the vehicle's information, such as Vehicle Identification Number (VIN) and model.
  • Then, select the 'Settings' section.

Step 2 – Set up the Scan Tool

  • The Scan Tool shows the item list for setting as in the image.
  • There are 11 setting functions for your Innova SDS50 SDS-Tech Tablet Scan Tool as below:
    • Vehicle Inspection Setup
    • Technical Support
    • Date and Time Setting
    • Language Setting
    • Wifi Setting
    • Smog Check or I/M Program Location
    • Unit of Measurement
    • Volume Setting
    • Adjust Brightness
    • Language Selection
    • About
  • Select each item to customize your Tablet Scan Tool.
Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us