Innova SDS50 SDS SDS-Tech: Electronic Parking Brake (EPB) Reset

Purpose

To guide users on how to perform the Electronic Parking Brake (EPB) Reset function while using the Innova SDS50 SDS-Tech Tablet Scan Tool.

Introduction

The EPB Reset feature is available in modern vehicles that are equipped with electronic parking brake systems. Unlike the traditional handbrake lever, the electronic parking brake (EPB) utilizes an electronic switch or button to automate the engagement and disengagement of the parking brake.

The purpose of the EPB Reset function is to assist users during maintenance procedures or when replacing components related to the parking brake system. It allows users to reset and calibrate the electronic parking brake following certain operations, such as replacing brake pads, brake rotors, or brake calipers. This feature ensures that the electronic parking brake is properly adjusted and functioning correctly after these specific tasks are performed.

With the EPB Reset function, users can conveniently reset the electronic parking brake without requiring specialized tools or having to visit a service center. This feature empowers vehicle owners to perform basic maintenance tasks themselves, saving time and potentially reducing service costs.

Procedure

Step 1 - Connect Innova SDS50 SDS-Tech Tablet Scan Tool to the vehicle and select 'Workshop Tools' function

  • First, connect the Innova SDS50 SDS-Tech Tablet Scan Tool to your vehicle via the On-Board Diagnostics (OBD) connector to retrieve the vehicle's information, such as Vehicle Identification Number (VIN) and model.
  • Then, select the 'Workshop Tools' section.

Step 2 – Select the ‘Electronic Parking Brake Reset’ function to perform the EPB Reset

  • The Innova SDS50 SDS-Tech Tablet Scan Tool shows the list of functions available for your vehicle. To initiate the EPB Reset, choose the 'Electronic Parking Brake Reset' item from the list.

Step 3 – Select the EPB system

  • Choose the ‘ABS Control Module’ system to enter the system responsible for the ‘Electrical Parking Brake Reset’ function on the vehicle.
  • NOTE: The name of the system varies by manufacturer, year, and model.
  • Select the ‘Basic Setting’ function.

Step 4 - Select the EPB function

  • The Scan Tool will then display some options to perform the reset function.
  • Choose the desired function to perform. In this case, select the ‘Start Brake Pad Change (Open Brakes’ item to perform the function.
  • NOTE: The EPB function name can vary between manufacturers.

Step 5 - Perform the ‘Start Brake Pad Change (Open Brakes)’ function

  • After selecting the EPB function, the Scan Tool shows the instructions as in the image and make sure to follow the instruction to perform the EPB function.
  • Tap the ‘Next’ button to go to the next step.
  • o proceed to the next step, select the 'Start' button and wait a minute for the Scan Tool to communicate with the vehicle and perform the function.

Step 6- Finish the function

  • When the process is completed, the Innova SDS50 SDS-Tech Tablet Scan Tool will display the status as shown in the image.
  • If the process is not completed, verify the condition/notes and repeat the EPB Reset function.
  • Select the ‘End’ button to back to the EPB function.

Reference Video

Electronic Parking Brake (EPB) Reset

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us