Innova SDS50 SDS SDS-Tech: Maintenance Reset
Purpose
To guide users on how to perform the Maintenance Reset while using the Innova SDS50 SDS-Tech Tablet Scan Tool.
Introduction
The Maintenance Reset Function plays an important role in the modern vehicle, which allows owners and technicians to reset various maintenance-related notifications, such as oil change reminders, tire rotation schedules, and inspection interval alerts. When a vehicle reaches a certain mileage or time interval, it may require inspection or maintenance tasks such as oil changes, filter replacements, tire rotations, and more. The onboard computer system keeps track of these intervals and displays reminders to the driver through warning lights or messages on the dashboard.
Resetting the inspection interval is important to ensure that the vehicle receives timely maintenance and to keep track of its overall health and performance. It helps drivers and mechanics stay organized and adhere to the manufacturer's recommended service intervals, which can contribute to the longevity and reliability of the vehicle.
So, this article shows you how to use the Innova SDS50 SDS-Tech Tablet Scan Tool to perform the Maintenance Reset function on a vehicle.
Procedure
Step 1 - Connect Innova SDS50 SDS-Tech Tablet Scan Tool to the vehicle and select 'Workshop Tools' function
- First, connect the Innova SDS50 SDS-Tech Tablet Scan Tool to your vehicle via the On-Board Diagnostics (OBD) connector to retrieve the vehicle's information, such as Vehicle Identification Number (VIN) and model.
- Then, select the 'Workshop Tools' section.
Step 2 – Select the ‘Electronic Parking Brake Reset’ function to perform the EPB Reset
- The Innova SDS50 SDS-Tech Tablet Scan Tool shows the list of functions available for your vehicle. To initiate the Maintenance Reset, choose the ‘Maintenance Reset' item from the list.
- After that select ‘ECM - Engine Control Module’ item to enter the system responsible for the ‘Maintenance Reset’ function on the vehicle.
- NOTE: The system name differs depending on the make and model of the vehicle.
Step 3 – Choose the function to perform
- The Scan Tool will display some functions available on your vehicle.
- Choose the desired function to perform. In this case, select the ‘Fuel Filter Life Reset’ function.
- NOTE: The functions differ depending on the make and model of the vehicle.
Step 4 - Perform the ‘Maintenance Reset’ function
- Wait for the Scan Tool to communicate with the vehicle to check the Fuel Filter Life status and shows as in the image.
- After that tap the ‘Input New Value’ button to input the new value of the Fuel Filter.
- NOTE: Prioritize replacing the fuel filter before proceeding with the 'Fuel Filter Life Reset' function to guarantee accurate fuel filter status for future maintenance.
- Select ‘Next’ button to go the next step.
- In this screen, input the new value of the Fuel Filter Life and select ‘Perform Reset’ button on the pop-up to perform the function.
- Wait the Scan Tool communicate with the vehicle and write the new value into the Engine Control Unit (ECU) memory.
- After that select the ‘Exit’ button to exit the function.