Innova SDS43 SDS-Inspector: Setup

Purpose

To guide you on how to set up your Innova SDS43 SDS-Inspector Tablet Scan Tool.

Procedure

Step 1 - Connect the SDS43 SDS-Inspector Tablet Scan Tool to the vehicle and select 'Settings'

• First, connect the Innova SDS43 SDS-Inspector Tablet Scan Tool to your vehicle via the Diagnostic Link Connector (DLC) to retrieve the vehicle's information, such as VIN and On-Board Diagnostic (OBD2) information.
• To access the ‘Settings’, from the Home Screen, select 'Settings' section and press the ‘OK’ button.

Step 2 – Set up the Scan Tool

• The Scan Tool shows the item list for setting as in the image.
• There are 12 setting function for your Innova SDS43 SDS-Inspector Tablet Scan Tool as below:
  • Vehicle Inspection Setup
  • AutoLink Setting
  • Wifi Setting
  • Adjust Brightness
  • Audible Tone
  • Language Selection
  • Unit of Measurement
  • Smog Check or I/M Program Location
  • QR RSPro App
  • QR RSPro App Settings
  • Version Information
  • Update
• Select each item, then press the 'OK' button to customize your Tablet Scan Tool.