Innova SDS43 SDS-Inspector: Electronic Parking Brake (EPB) Reset
Purpose
To guide users on how to perform the Electronic Parking Brake (EPB) Reset function while using the Innova SDS43 SDS-Inspector Tablet Scan Tool.
Introduction
The EPB Reset feature is available in modern vehicles that are equipped with electronic parking brake systems. Unlike the traditional handbrake lever, the electronic parking brake (EPB) utilizes an electronic switch or button to automate the engagement and disengagement of the parking brake.
The purpose of the EPB Reset function is to assist users during maintenance procedures or when replacing components related to the parking brake system. It allows users to reset and calibrate the electronic parking brake following certain operations, such as replacing brake pads, brake rotors, or brake calipers. This feature ensures that the electronic parking brake is properly adjusted and functioning correctly after these specific tasks are performed.
With the EPB Reset function, users can conveniently reset the electronic parking brake without requiring specialized tools or having to visit a service center. This feature empowers vehicle owners to perform basic maintenance tasks themselves, saving time and potentially reducing service costs.
Procedure
Step 1 - Connect the SDS43 SDS-Inspector Tablet Scan Tool to the vehicle and select 'Workshop Tools'
- First, connect the Innova SDS43 SDS-Inspector Tablet Scan Tool to your vehicle via the Diagnostic Link Connector (DLC) to retrieve the vehicle's information, such as VIN and On-Board Diagnostic (OBD2) information.
- To access the ‘Workshop Tools’, from the Home Screen, select 'Workshop Tools' section and press the ‘OK’ button.
Step 2 – Select the ‘Electronic Parking Brake Reset’ function to perform the EPB Reset
- The Innova SDS43 SDS-Inspector Tablet Scan Tool offers a range of features, including 12 Service Reset functions, as well as the Electronic Parking Brake Test functions, as illustrated in the image. To initiate the EPB Reset, choose the 'Electronic Parking Brake Reset' item from the list.
Step 3 - Select the EPB system
- To access the reset function, choose the ‘EPB – Electronic Parking Brake' system then press the ‘OK’ button.
- NOTE: The name of the EPB Reset function varies by manufacturer, year and model.
- The Scan Tool will then display some options to perform the reset function.
- Select the ‘PAD Change Mode – Apply’ function.
Step 4 – Perform the EPB function
- After selecting the EPB function, the Scan Tool shows the instructions as in the image and make sure to following the instruction to perform the EPB function.
- To proceed to the next step, select the 'Continue' softkey and press the ‘OK’ button and wait a minute.
Step 5 – Finish the function
- When the process is completed, the Innova SDS43 SDS-Inspector Tablet Scan Tool will display the status as shown in the image.
- If the process is not completed, verify the condition/notes and repeat the EPB Reset function.