RepairSolutions2: Setup 1000 Dongle with Android

Step 1 - Get the RepairSolutions2 App.

• On your Android phone, download the RepairSolutions2 App from Google Play.

  You can view the app's information online here: Google Play Store Alternatively, you can:

  1. Open Google Play on your Android Device.
  2. Search for RepairSolutions2.
  3. Select the install button to begin downloading the app.

Step 2 - Create an account.

• Once installed, open the RS2 app and select Create account.

• Fill out your details, then read and check the box I agree to the EULA/Terms and Privacy Policy.

  Note: It's optional to check the box for Opt-In to Marketing & Promotional Emails.

  After completing these steps, select Continue.

Step 3 - Proceed to the app.

• Select Connect Scan Tool to begin connecting the RS2 app or select Show Me How for more instructions.
• Make sure Location is turned on in your Bluetooth Settings. If Location is off, you'll get a prompt to Allow your location services to be turned on. Without Location turned on, the RS2 app will not pair.
• Select Allow to turn your location on to continue with Pairing.
• If you Deny your location to be turned on, you'll get this message. Select Settings to go into your Bluetooth settings to turn on location.

• In this demonstration, the phone being used is an Android 9.

  Shows Location turned Off.

• Select Agree to turn on location.
• Your location should be turned on. You can now pair to the RS2 app.

Step 4 - Follow the instructions on the screen.

• A Bluetooth connection is required for the RS2 app to work with your smart device. Make sure your Bluetooth is turned ON before pairing your smart device and while performing a scan.

  You can select Go to settings to turn on your Bluetooth.

• Plug your Dongle into your Vehicle.

  If you are unsure where to plug your scan tool device into your vehicle, select the option Show me where at the bottom of the description to find your OBD2 DLC Port.

  Alternatively, you may check Innova's online OBD2 DLC Port Locator by clicking here.

• Turn your vehicle to the ON position. You do not need to start your vehicle.

  Select the option Show me how at the bottom of the description for details on how to turn the ignition on.

• After following the instructions and checking all three boxes on the screen, select Continue.

Step 5 - Pairing to your 1000 Dongle.

• Wait for the app to search for your Dongle device.

  Select your device once it appears on the list.

• Give your OBD2 device a moment to pair with the app.

Step 6 - Select an option to begin scanning your vehicle.

• Once your tool is paired with the app, the system will allow you to begin scanning your vehicle for codes and engine problems.