Innova SD35 SD-Advisor: Scan by Selecting System

Introduction

The OEM Diagnostics function allows you to perform enhanced, OEM-level diagnostics not available over generic OBD2. It provides the ability to retrieve Enhanced DTCs for ABS, Transmission, and Engine Control Modules. You can even provide a comprehensive Vehicle Inspection report that shows the complete Diagnostic Report, Customer Report, and Collision Industry Report – offering a complete overview of the vehicle’s current health status.

The Select System option on the SD35 allows you to perform a comprehensive module scan in each Powertrain, Body, or Chassis group.

Procedure

Step 1 - Select OEM Diagnostics.

• Connect the SD35 to your vehicle via the Diagnostic Link Connector (DLC) to retrieve the vehicle's information.
• From the Home screen, select OEM Diagnostics.

Step 2 - Select the Select System option from the OEM Diagnostics screen.

Step 3 - Select the module you wish to scan.

• The Module Selection screen will display.
• Select either Powertrain, Body, or Chassis modules you wish to scan, then press OK.
• A “Linking…” message will display while the Scan Tool scans all available modules.

Step 4 - View the number of DTCs recorded for each available module.

• When the scan is complete, the screen shows the number of DTCs recorded for each available

  module.

• The results window lists all tested control modules with their corresponding result:
  • Fault – Indicates the number of reported DTCs.
  • No Fault – Indicates that no DTCs were found.

  • Available – Indicates that the module is part of the system but

    does not report DTCs.

• The results screen also allows you to either:
  • Erase All DTCs - Erases all the module’s retrieved Diagnostic Trouble Codes (DTCs).
  • Rescan - Performs scanning all systems again.
• Select the desired system, then press OK.

Step 5 - Select the preferred function on your selected system.

• The menu for each module will display a list of options.
• Depending on the module selected, you can read DTCs, erase DTCs and view Live Data.
• Select the function you would like to run. Or press Back to return to the selected module screen.
  • Read DTCs
  • Erase DTCs
  • Live Data