Innova SD35 SD-Advisor: Oil Maintenance Reset

Purpose

To guide users on how to perform the Oil Maintenance Reset function while using the Innova SD35 SD-Advisor Tablet Scan Tool.

Procedure

Step 1 - Connect the Innova SD35 SD-Advisor Tablet Scan Tool to the vehicle and select the 'Workshop Tools' function.

• First, connect the Innova SD35 SD-Advisor Tablet Scan Tool to your vehicle via the On-Board Diagnostics (OBD) connector to retrieve the vehicle's information.
• Then, select the 'Workshop Tools' function.

Step 2 – Select the ‘Oil Maintenance Reset’ function.

• Select the ‘Oil Maintenance Reset’ function in the Workshop Tools function list.
  • An “instructional” dialog will display to confirm the selection.
  • Select Yes to continue. Or, No to cancel.

• Note: If the Tablet cannot reset the Oil Maintenance Light, an “instructional” dialog

  will display, showing the manual procedures for resetting the indicator light. When finished

  viewing the instructions, press Back to return to the Workshop Tools screen.

Step 3 – Perform the ‘Oil Maintenance Reset’ function.

• When the reset process has been completed, a confirmation message will display. Select Back to return to the Workshop Tools screen.
• If the Oil Maintenance Reset is not successful, an advisory message will display.
  • Select "Yes' to perform the Oil Maintenance Reset by procedure.
  • An “instructional” dialog displays, showing the manual procedures for resetting the indicator light.
    • If you do not wish to perform the Oil Maintenance Reset by procedure, select Exit to return to the Workshop Tools screen.
    • A “status” message will display while the Oil Maintenance Reset is in progress.
  • When finished viewing the instructions, press Back to return to the Workshop Tools.