Innova 1000: Scanning All Modules (Whole System Scan)
Purpose
Guidance on how to scan all modules with the 1000 Dongle.
Step 1 - Select Whole System scan.
|
After pairing with the RS2 app, you can now perform a Whole System scan. Select Whole System to scan all systems in the vehicle. |
Step 2 - Wait until the RS2 app reads the data from your vehicle.
|
The RS2 app will read the data from your vehicle, including the odometer. |
Step 3 - Select Generate Report.
|
After your vehicle's odometer is read by the RS2 app, select Generate Report. |
|
While generating the report, ensure your vehicle is turned to the ON position, and your smart device is close to your dongle. |
Note: Your vehicle’s odometer mileage should automatically be recorded in the Odometer field.
Step 4 - Select Results to view the Report Page for your Whole System scan.
|
The Report Page will appear after the RS2 app is done generating the report. The report will show the DTCs stored in all your vehicle's modules. To access the codes list, select Results. |
